Hub/Switch Reference Guide

452 Session Management Commands
NN47250-100 (Version 02.51)
The following command displays information about network session 88:
WSS# show sessions network session-id 88
Local Id: 88
Global Id: SESS-88-00040f-876766-623fd6
State: ACTIVE
SSID: Rack-39-PM
Port/Radio: 10/1
MAC Address: 00:0f:66:f4:71:6d
User Name: last-resort-Rack-39-PM
IP Address: 10.2.39.217
Vlan Name: default
Tag: 1
Session Start: Wed Apr 12 21:19:27 2006 GMT
Last Auth Time: Wed Apr 12 21:19:26 2006 GMT
Last Activity: Wed Apr 12 21:19:49 2006 GMT ( <15s ago)
Session Timeout: 0
Idle Time-To-Live: 175
Login Type: LAST-RESORT
EAP Method: NONE, using server 172.16.0.1
Session statistics as updated from AP:
Unicast packets in: 31
Unicast bytes in: 3418
Unicast packets out: 18
Unicast bytes out: 2627
Multicast packets in: 0
Multicast bytes in: 0
Number of packets with encryption errors: 0
Number of bytes with encryption errors: 0
Last packet data rate: 48
Last packet signal strength: -60 dBm
Last packet data S/N ratio: 35
Protocol: 802.11
Session CAC: disabled
For descriptions of the fields of show sessions network session-id output, see Table 72 on page 445.
Table 3: show sessions network (summary) Output
Field Description
User Name Up to 30 characters of the name of the authenticated user of this
session.
Note: For a MAC-authenticated session, this value is the client device’s
MAC address.
Sess ID Locally unique number that identifies this session. An asterisk (*) next
to a session ID indicates that the session is fully active.