Hub/Switch Reference Guide

450 Session Management Commands
NN47250-100 (Version 02.51)
Defaults None.
Access All.
History
Usage WSS Software displays information about network sessions in three types of displays. See the
following tables for field descriptions.
Authorization attribute values can be changed during authorization. If the values are changed, show sessions output
shows the values that are actually in effect following any changes.
Examples To display summary information for all network sessions, type show sessions network. For
example:
Version 4.1 Output added to the show network sessions verbose command to indicate
the user’s authorization attributes and whether they were supplied through
AAA or through configured SSID defaults in a service profile.
Version 5.0
• Host name field added to show sessions network
verbose output.
• AP serial number added to show sessions network
verbose output.
• The following fields added to show sessions network
session-id output:
•Local Id
• SSID
• Last Auth Time
• Last Activity
• Idle Time-To-Live
• Login Type
•Protocol
• Session CAC
• Authentication Method field renamed to EAP Method.
• New values for the source of user attribute values
(attributes include Vlan-Name, Start-Date, and so on.)
See Table 71 on page 443.
Summary display See Table 70 on page 442.
Verbose display See Table 71 on page 443.
show sessions network session-id display See Table 72 on page 445.