Hub/Switch Reference Guide

44 Port Commands
NN47250-100 (Version 02.51)
Defaults The default vales are the same as the defaults for the set port type ap command.
Access Enabled.
History
Examples
The following command configures apAP 1 for AP model AP-2330A with serial-ID
0322199999:
WSS# set ap 1 serial-id 0322199999 model 2330A
success: change accepted.
ap-num Number for the AP.
The range of valid connection numbers depends on the
WSS model:
• 2382—1 to 320
• 2380—1 to 300
• 2360/61—1 to 30
• 2350—1 to 8
serial-id serial-ID AP serial ID. The serial ID is listed on the AP case. To
display the serial ID using the CLI, use the show
version details command.
model {2330 | 2330A | 2330B | 2332-A1
| 2332-A2 | 2332-A3 | 2332-A4 |
2332-A5 | 2332-A6 | 2332-E1 | 2332-E2 |
2332-E3 | 2332-E4 | 2332-E5 |2332-E6 |
2332-E7 | 2332-E8 | 2332-E9 | 2332-J1}
AP model.
radiotype 11a | 11b | 11g Radio type:
• 11a—802.11a
• 11b—802.11b
• 11g—802.11g
Note: This option applies only to single-radio models.
Version 4.1 New values for model option added:
•2330
• 2330A
Version 5.0.11 New values for model option added:
• 2330B
Version 6.0 Option dap removed
New value for model option added:
2332-A1, 2332-A2, 2332-A3, 2332-A4, 2332-A5, 2332-A6,
2332-E1, 2332-E2, 2332-E3, 2332-E4, 2332-E5, 2332-E6,
2332-E7, 2332-E8, 2332-E9, and 2332-J1.