Hub/Switch Reference Guide

428 IGMP Snooping Commands
NN47250-100 (Version 02.51)
Syntax set igmp mrsol {enable | disable} [vlan vlan-id]
Defaults Multicast router solicitation is disabled on all VLANs by default.
Access Enabled.
Examples The following command enables multicast router solicitation on VLAN orange:
WSS# set igmp mrsol enable vlan orange
success: change accepted.
See Also set igmp mrsol mrsi on page 418
set igmp mrsol mrsi
Changes the interval between multicast router solicitations by a WSS on one VLAN or all VLANs.
Syntax set igmp mrsol mrsi seconds [vlan vlan-id]
Defaults The interval between multicast router solicitations is 30 seconds by default.
Access Enabled.
Examples The following example changes the multicast router solicitation interval to 60 seconds:
WSS# set igmp mrsol mrsi 60
success: change accepted.
See Also set igmp mrsol on page 417
set igmp oqi
Changes the IGMP other-querier-present interval timer on one VLAN or all VLANs on a WSS.
enable Enables multicast router solicitation.
disable Disables multicast router solicitation.
vlan
vlan-id
VLAN name or number. If you do not specify a VLAN, multicast router
solicitation is disabled or enabled on all VLANs.
seconds Number of seconds between multicast router solicitations. You can
specify a value from 1 through 65,535.
vlan
vlan-id
VLAN name or number. If you do not specify a VLAN, WSS Software
changes the multicast router solicitation interval for all VLANs.