Hub/Switch Reference Guide

416 STP Commands
NN47250-100 (Version 02.51)
See Also set spantree portfast on page 396
show spantree portvlancost
Displays the cost of a port on a path to the STP root bridge, for each of the port’s VLANs.
Syntax show spantree portvlancost port-list
Defaults None.
Access All.
Examples The following command shows the STP port cost of port 1:
WSS# show spantree portvlancost 1
port 1 VLAN 1 have path cost 19
See Also
• clear spantree portcost on page 390
• clear spantree portvlancost on page 391
• set spantree portcost on page 395
• set spantree portvlancost on page 397
• show spantree on page 400
Table 3: Output for show spantree portfast
Field Description
Port Port number.
VLAN VLAN number.
Portfast State of the uplink fast convergence feature:
• Enable
• Disable
port-list List of ports.