Hub/Switch Reference Guide

STP Commands 415
Nortel WLAN—Security Switch 2300 Series Command Line Reference
See Also show spantree on page 400
show spantree portfast
Displays STP uplink fast convergence information for all network ports or for one or more network ports.
Syntax show spantree portfast [port-list]
Defaults None.
Access All.
Examples The following command shows uplink fast convergence information for all ports:
WSS# show spantree portfast
Port Vlan Portfast
----------- ---- ----------
1 1 disable
2 1 disable
3 1 disable
4 1 enable
5 1 disable
6 1 disable
7 1 disable
8 1 disable
10 1 disable
15 1 disable
16 1 disable
17 1 disable
18 1 disable
19 1 disable
20 1 disable
21 1 disable
22 1 disable
11 2 enable
12 2 disable
13 2 disable
14 2 enable
Table 60 describes the fields in this display.
port-list List of ports. If you do not specify any ports, WSS Software displays
uplink fast convergence information for all ports.