Hub/Switch Reference Guide

392 AP Commands
NN47250-100 (Version 02.51)
Enforce SODA checks: yes SODA remediation ACL:
Custom success web-page: Custom failure web-page:
Custom logout web-page: Custom agent-directory:
Static COS: no COS: 0
CAC mode: none CAC sessions: 14
User idle timeout: 180 Idle client probing: yes
Keep initial vlan: no Web Portal Session Timeout: 5
Web Portal ACL:
WEP Key 1 value: <none> WEP Key 2 value: <none>
WEP Key 3 value: <none> WEP Key 4 value: <none>
WEP Unicast Index: 1 WEP Multicast Index: 1
Shared Key Auth: NO
WPA enabled:
ciphers: cipher-tkip
authentication: 802.1X
TKIP countermeasures time: 60000ms
vlan-name = orange
session-timeout = 300
service-type = 2
11a beacon rate: 6.0 multicast rate: AUTO
11a mandatory rate: 6.0,12.0,24.0 standard rates: 9.0,18.0,36.0,48.0,54.0
11b beacon rate: 2.0 multicast rate: AUTO
11b mandatory rate: 1.0,2.0 standard rates: 5.5,11.0
11g beacon rate: 2.0 multicast rate: AUTO
11g mandatory rate: 1.0,2.0,5.5,11.0 standard rates: 6.0,9.0,12.0,18.0,24.0, 36.0,48.0,54.0
Table 57 describes the fields in this display.
Table 24: Output for show service-profile
Field Description
ssid-name Service set identifier (SSID) managed by this service profile.
ssid-type SSID type:
• crypto—Wireless traffic for the SSID is
encrypted.
• clear—Wireless traffic for the SSID is
unencrypted.
Beacon Indicates whether the radio sends beacons, to advertise the SSID:
•no
•yes
Proxy ARP Indicates whether proxy ARP is enabled. When this feature is
enabled, WSS Software answers ARP requests on behalf of
wireless clients.
DHCP restrict Indicates whether DHCP Restrict is enabled. When this feature is
enabled, WSS Software allows only DHCP traffic for a new
client until the client has successfully completed authentication
and authorization.