Hub/Switch Reference Guide

386 AP Commands
NN47250-100 (Version 02.51)
Examples The following command displays information about the AP radios that are in the same group as
radio 1 on AP 3:
WSS# show load-balancing group ap 3 radio 1
Radios in the same load-balancing group as: ap3/radio1
--------------------------------------------------
IP address AP Radio Overlap
------------------ ---- ----- -------
10.2.28.200 3 1 100/100
The following command displays information about RF load balancing group blue:
WSS# show load-balancing group blue
Load-balancing group: blue
IP address AP Radio Clients
------------------ ---- ----- -------
10.2.28.200 3 1 0
Table 55 describes the fields in displayed by the show load-balancing group command.
See Also
• set load-balancing strictness on page 277
• set ap radio load-balancing on page 268
• set ap local-switching mode on page 260
show radio-profile
Displays radio profile information.
Syntax show radio-profile {name | ?}
Table 22: Output for show load-balancing group
Field Description
IP address The IP address of the AP in the load-balancing group.
AP AP number
Radio Radio number
Overlap The amount of overlapping coverage area the specified AP radio
has with the AP radio in the list. An overlap of 100/100 indicates
that the AP radios have exactly the same coverage area.
Clients The current client load on the AP radio.
name Displays information about the named radio profile.
? Displays a list of radio profiles.