Hub/Switch Reference Guide

376 AP Commands
NN47250-100 (Version 02.51)
Syntax show ap vlan ap-number
Defaults None.
Access All.
History Introduced in WSS Version 6.0.
Examples The following command displays information about the VLANs switched by AP 7:
WSS# show ap vlan 7
AP 7:
VLAN Name Mode Port Tag
------------ ------------ ---- -------------
1 default local 1 none
2 red local 1 2
radio_1 20
radio_1 21
radio_2 22
4 green local 1 4
radio_1 23
5 yellow tunnel WSS_tun 5
radio_1 24
Table 42 describes the fields in the show ap vlan output.
• set vlan-profile
• set ap local-switching mode on page 260
ap-number Index value that identifies the AP on the WSS switch.
Table 15: Output for show ap vlan
Field Description
VLAN VLAN number.
Name VLAN name
Mode Whether packets for the VLAN are locally switched by the AP,
or are tunneled to an WSS switch, which places them on the
VLAN.
Port The port(s) through which traffic for the VLAN is sent.
TAG VLAN tag value. If the interface is untagged, none is displayed
in the TAG field.