Hub/Switch Reference Guide

AP Commands 371
Nortel WLAN—Security Switch 2300 Series Command Line Reference
ap100 oa-
10.8.255.11 AP-122 00:0b:0e:da:da:82 E 1/17 E36/11 0d 0h 0m17s
Table 46 and Table 46 describe the fields in these displays.
Table 13: Output for show ap status
Field Description
AP Connection ID for the AP.
Note: This field is applicable only if the AP is configured on the
WSS as a AP.
Port WSS port number.
Note: This field is applicable only if the AP is directly connected
to the WSS and the WSS’s port is configured as an AP access
port.
IP-addr IP address of the AP. The address is assigned to the AP by a
DHCP server.
Note: This field is applicable only if the AP is configured on the
WSS as a AP.
AP model AP model number.
manufacturer Company that made the AP.
fingerprint Hexadecimal fingerprint of the AP’s public encryption key.
Note: This field is displayed only for APs.
name AP name.
Link Status of this link with the AP and the AP port at the other end of
the link. The status can be up or down.
AP port AP port number connected to this WSS port.