Hub/Switch Reference Guide

AP Commands 365
Nortel WLAN—Security Switch 2300 Series Command Line Reference
show ap etherstats
Displays Ethernet statistics for an AP’s Ethernet ports.
Syntax show ap etherstats [port-list | ap-num]
Defaults None.
Access Enabled.
History Introduced in WSS Software Version 3.0.
Option dap removed in version 6.0.
Examples The following command displays Ethernet statistics for the Ethernet ports on AP 1:
WSS# show ap etherstats 1
AP: 1 ether: 1
=================================
RxUnicast: 75432 TxGoodFrames: 55210
RxMulticast: 18789 TxSingleColl: 32
RxBroadcast: 8 TxLateColl: 0
RxGoodFrames: 94229 TxMaxColl: 0
RxAlignErrs: 0 TxMultiColl: 47
Table 10: Output for show ap qos-stats
Field Description
CoS CoS value associated with the forwarding queues.
Queue Forwarding queue.
AP
or
Port
AP number or AP port number.
radio Radio number.
Tx Number of packets transmitted to the air from the queue.
TxDrop Number of packets dropped from the queue instead of being
transmitted.
Some packet drops are normal, especially if the RF environment
is noisy. Also, it is normal for a mildly congested radio to drop
low-priority packets proportionally more often than high-priority
packets. However, continuous packet drops from the Voice queue
can indicate over-subscription or excessive interference in the RF
environment.
port-list List of WSS ports directly connected to the AP(s) for which to display
counters.
ap-num Number of a AP for which to display counters.