Hub/Switch Reference Guide

358 AP Commands
NN47250-100 (Version 02.51)
• show ap unconfigured on page 374
• show radio-profile on page 376
show ap counters
Displays AP and radio statistics counters.
Syntax show ap counters [port-list [radio {1 | 2}]]
Defaults None.
Access Enabled.
History
Usage To display statistics counters and other information for individual user sessions, use the show
sessions network command.
Examples The following command shows statistics counters for AP 7:
WSS# show ap counters 7
AP: 7 radio: 1
===================
LastPktXferRate 2 PktTxCount 73473
NumCntInPwrSave 0 MultiPktDrop 0
LastPktRxSigStrength -89 MultiBytDrop 0
LastPktSigNoiseRatio 4 User Sessions 0
TKIP Pkt Transfer Ct 0 MIC Error Ct 0
port-list List of ports connected to the AP(s) for which to display statistics
counters.
ap-num Number of a AP for which to display statistics counters.
radio 1 Shows statistics counters for radio 1.
radio 2 Shows statistics counters for radio 2. (This option does not apply to
single-radio models.)
Version 4.0 New fields added:
• Radio Recv Phy Err Ct
• Transmit Retries
• Radio Adjusted Tx Pwr
• Noise Floor
• 802.3 Packet Tx Ct
• 802.3 Packet Rx Ct
• No Receive Descriptor
Version 6.0 Option dap removed.