Hub/Switch Reference Guide

AP Commands 357
Nortel WLAN—Security Switch 2300 Series Command Line Reference
See Also
• set ap on page 33
• set port type ap on page 41
• set ap bias on page 249
• set ap fingerprint on page 257
• set ap group on page 258
• set ap name on page 261
• set ap upgrade-firmware on page 275
• set ap radio mode on page 270
• set ap radio antennatype on page 263
• set ap radio channel on page 267
• set ap radio radio-profile on page 271
• set ap radio tx-power on page 272
• show ap connection on page 371
• show ap global on page 373
type Radio type:
• 802.11a
• 802.11b
• 802.11g
mode Radio state:
• Enabled
• Disabled
channel Channel number.
antennatype External antenna model, if applicable.
tx pwr Transmit power, in dBm.
profile Radio profile that manages the radio. Until you assign the radio
to a radio profile, WSS Software assigns the radio to the default
radio profile.
auto-tune max-power Maximum power level the RF Auto-Tuning feature can set on the
radio.
• The value default means RF Auto-Tuning can set
the power up to the maximum level allowed for
the country of operation.
• A specific numeric value means you or another
administrator set the maximum value.
Table 7: Output for show ap config (continued)
Field Description