Manualshelf

Hub/Switch Reference Guide

ManualsBrandsNortel Networks ManualsSwitch2300 Series
31323334353637383940
Port Commands 35
Nortel WLAN—Security Switch 2300 Series Command Line Reference
See Also
• monitor port counters on page 28
• show port counters on page 46
clear port-group
Removes a port group.
Syntax
clear port-group name name
Defaults
None.
Access
Enabled.
Examples
The following command clears port group server1:
WSS# clear port-group name server1
success: change accepted.
See Also
• set port-group on page 35
• show port-group on page 47
clear port media-type
Disables the copper interface and reenables the fiber interface on a 2380 gigabit Ethernet port.
Syntax
clear port media-type port-list
Defaults
The GBIC (fiber) interface is enabled, and the copper interface is disabled, by default.
Access
Enabled.
History
Introduced in WSS Software Version 4.0.
Usage
This command applies only to the 2380. This command does not affect a link that is already active
on the port.
Examples
The following command disables the copper interface and reenables the fiber interface on port 2:
2380# clear port media-type 2
name name
Name of the port group.
port-list List of physical ports. WSS Software disables the copper interface and
reenables the fiber interface on all the specified ports.