Hub/Switch Reference Guide

AP Commands 349

Nortel WLAN—Security Switch 2300 Series Command Line Reference

set service-profile web-portal-logout

Changes the web portal logout mode.

Syntax

set service-profile name web-portal-logout mode {enable | disable}

Access

Enabled.

History

Introduced in WSS Software Version 6.0.

Examples

The following command allows the web portal service to enable the web portal logout

functionality.

WSS# set service-profile sp1 web-portal-logout mode enable

success: change accepted.

set service-profile web-portal-logout logout-url

The URL should be of the form https://host/logout.html.

Defaults

By default, the logout URL uses the IP address of the WSS as the host part of the URL.

The host can be either an IP address or a hostname.

Access

Enabled.

History

Introduced in WSS Software Version 6.0.

Usage

Specifying the logout URL is useful if you want to standardize it across your network.

Examples

You can configure the logout URL on all of the WSS in the Mobility Domain as https:/

/host/logout.html.

WSS# set service-profile spl web-portal-logout logout-url https://host/logout.html

success: change accepted.

set service-profile web-portal-session-timeout

Changes the number of seconds WSS Software allows Web Portal Web-based AAA sessions to remain in the