Hub/Switch Reference Guide

342 AP Commands
NN47250-100 (Version 02.51)
Examples The following command applies the name guest to the SSID managed by service
profile clear_wlan:
WSS# set service-profile clear_wlan ssid-name guest
success: change accepted.
The following command applies the name corporate users to the SSID managed by service profile
mycorp_srvcprf:
WSS# set service-profile mycorp_srvcprf ssid-name “corporate users”
success: change accepted.
See Also
• set service-profile ssid-type on page 332
• show service-profile on page 380
set service-profile ssid-type
Specifies whether the SSID managed by a service profile is encrypted or unencrypted.
Syntax set service-profile name ssid-type [clear | crypto]
Defaults The default SSID type is crypto.
Access Enabled.
History Introduced in WSS Software Version 3.0.
Examples The following command changes the SSID type for service profile clear_wlan to
clear:
WSS# set service-profile clear_wlan ssid-type clear
success: change accepted.
See Also
• set service-profile ssid-name on page 331
• show service-profile on page 380
set service-profile static-cos
Enables or disables static CoS on a service profile. Static CoS assigns the same CoS level to all traffic on the
service profile’s SSID, regardless of 802.1p or DSCP markings in the packets themselves, and regardless of
name Service profile name.
clear Wireless traffic for the service profile’s SSID is not encrypted.
crypto Wireless traffic for the service profile’s SSID is encrypted.