Hub/Switch Reference Guide

AP Commands 341
Nortel WLAN—Security Switch 2300 Series Command Line Reference
Access Enabled.
History Introduced in WSS Software Version 4.1.
Usage Use this command to specify a custom page that is loaded by the client when it passes the
checks performed by the SODA agent. After this page is loaded, the client is placed in its assigned
VLAN and granted access to the network.
The page is assumed to reside in the root directory on the WSS. You can optionally specify a different
directory where the page resides.
This functionality occurs only when the enforce checks option is enabled for the service profile. The enforce
checks option is enabled by default.
Examples The following command specifies success.html, which resides in the root directory on
the WSS, as the page to load when a client passes the SODA agent checks:
WSS# set service-profile sp1 soda success-page success.html
success: change accepted.
The following command specifies success.html, which resides in the soda-files directory on the WSS, as the
page to load when a client passes the SODA agent checks:
WSS# set service-profile sp1 soda success-page soda-files/success.html
success: change accepted.
See Also
• set service-profile soda enforce-checks on page 326
• set service-profile soda mode on page 329
• show service-profile on page 380
set service-profile ssid-name
Configures the SSID name in a service profile.
Syntax set service-profile name ssid-name ssid-name
Defaults The default SSID type is crypto (encrypted) and the default name is trapeze.
Access Enabled.
History
name Service profile name.
ssid-name Name of up to 32 alphanumeric characters.
You can include blank spaces in the name, if you delimit the name with
single or double quotation marks. You must use the same type of
quotation mark (either single or double) on both ends of the string.
Version 4.0 Support added for blank spaces in the SSID name.