Hub/Switch Reference Guide

34 Port Commands
NN47250-100 (Version 02.51)
clear ap
Removes a AP.
Syntax clear ap ap-num
Defaults None.
Access Enabled.
Examples The following command clears AP 1:
WSS# clear ap 1
This will clear specified AP devices. Would you like to continue? (y/n) [n]y
See Also
• set ap on page 33
• set port type ap on page 41
clear port counters
Clears port statistics counters and resets them to 0.
Syntax clear port counters
Defaults None.
Access Enabled.
Examples The following command clears all port statistics counters and resets them to 0:
WSS# clear port counters
success: cleared port counters
show port mirror on page 49
clear port mirror on page 26
Statistics show port counters on page 46
monitor port counters on page 28
clear port counters on page 24
Caution! When you clear a AP, WSS Software ends user sessions that are using the
AP.
ap-num Number of the AP(s) you want to remove.