Hub/Switch Reference Guide

AP Commands 333
Nortel WLAN—Security Switch 2300 Series Command Line Reference
set service-profile psk-raw
Configures a raw hexadecimal preshared key (PSK) to use for authenticating WPA clients, in a service profile.
Radios use the PSK as a pairwise master key (PMK) to derive unique pairwise session keys for individual
WPA clients.
Syntax set service-profile name psk-raw hex
Defaults None.
Access Enabled.
History Introduced in WSS Software Version 3.0.
Usage WSS Software converts the hexadecimal number into a 256-bit binary number for system
use. WSS Software also stores the hexadecimal key in the WSS's configuration. The binary number
is never displayed in the configuration.
To use PSK authentication, you must enable it and you also must enable the WPA IE.
Examples The following command configures service profile sp3 to use a raw PSK with PSK
clients:
WSS# set service-profile sp3 psk-raw
c25d3fe4483e867d1df96eaacdf8b02451fa0836162e758100f5f6b87965e59d
success: change accepted.
See Also
• set mac-user attr on page 197
• set service-profile auth-psk on page 309
• set service-profile psk-phrase on page 322
• set service-profile wpa-ie on page 342
• show service-profile on page 380
set service-profile rsn-ie
Enables the Robust Security Network (RSN) Information Element (IE).
The RSN IE advertises the RSN (sometimes called WPA2) authentication methods and cipher suites supported
by radios in the radio profile mapped to the service profile.
name Service profile name.
hex A 64-bit ASCII string representing a 32-digit hexadecimal number. Enter
the two-character ASCII form of each hexadecimal number.