Hub/Switch Reference Guide

332 AP Commands

NN47250-100 (Version 02.51)

Usage

To further reduce broadcast traffic on a service profile, use the set service-profile no-broadcast

command to disable DHCP and ARP request broadcasts.

Examples

The following command enables proxy ARP on service profile sp1:

WSS# set service-profile sp1 proxy-arp enable

success: change accepted.

See Also

• set service-profile dhcp-restrict on page 316

• set service-profile no-broadcast on page 320

• show service-profile on page 380

set service-profile psk-phrase

Configures a passphrase for preshared key (PSK) authentication to use for authenticating WPA clients, in a service

profile. Radios use the PSK as a pairwise master key (PMK) to derive unique pairwise session keys for individual WPA

clients.

Syntax

set service-profile name psk-phrase passphrase

Defaults

None.

Access

Enabled.

History

Introduced in WSS Software Version 3.0.

Usage

WSS Software converts the passphrase into a 256-bit binary number for system use and a raw

hexadecimal key to store in the WSS's configuration. Neither the binary number nor the passphrase itself is

ever displayed in the configuration.

To use PSK authentication, you must enable it and you also must enable the WPA IE.

Examples

The following command configures service profile sp3 to use passphrase

“1234567890123<>?=+&% The quick brown fox jumps over the lazy sl”:

WSS# set service-profile sp3 psk-phrase "1234567890123<>?=+&% The quick brown fox

jumps over the lazy sl"

success: change accepted.