Hub/Switch Reference Guide

AP Commands 313
Nortel WLAN—Security Switch 2300 Series Command Line Reference
Examples The following command maps service-profile wpa_clients to radio profile rp2:
WSS# set radio-profile rp2 service-profile wpa_clients
success: change accepted.
See Also
• set service-profile attr on page 306
• set service-profile auth-dot1x on page 307
• set service-profile auth-fallthru on page 308
• set service-profile auth-psk on page 309
• set service-profile beacon on page 310
• set service-profile cac-mode on page 311
• set service-profile cac-session on page 312
• set service-profile cipher-ccmp on page 312
• set service-profile cipher-tkip on page 313
• set service-profile cipher-wep104 on page 314
• set service-profile cipher-wep40 on page 315
• set service-profile cos on page 315
• set service-profile dhcp-restrict on page 316
• set service-profile idle-client-probing on page 317
• set service-profile long-retry-count on page 319
• set service-profile no-broadcast on page 320
• set service-profile proxy-arp on page 321
• set service-profile psk-phrase on page 322
• set service-profile psk-raw on page 323
• set service-profile rsn-ie on page 323
• set service-profile shared-key-auth on page 324
• set service-profile short-retry-count on page 325
• set service-profile soda mode on page 329
• set service-profile ssid-name on page 331
• set service-profile ssid-type on page 332
• set service-profile static-cos on page 332
• set service-profile tkip-mc-time on page 333
• set service-profile transmit-rates on page 334
• set service-profile user-idle-timeout on page 336
• set service-profile web-portal-form on page 337
• set service-profile web-portal-logout on page 339
• set service-profile wep active-multicast-index on page 340
• set service-profile wep active-unicast-index on page 341