Hub/Switch Reference Guide

310 AP Commands
NN47250-100 (Version 02.51)
no-broadcast disable Does not reduce wireless
broadcast traffic by sending
unicasts to clients for ARP
requests and DHCP Offers and
Acks instead of forwarding them
as multicasts.
proxy-arp disable Does not reply on behalf of
wireless clients to ARP requests
for client IP addresses. Instead,
the radio forwards the ARP
Requests as wireless broadcasts.
psk-phrase No passphrase defined Uses dynamically generated keys
rather than statically configured
keys to authenticate WPA clients.
psk-raw No preshared key
defined
Uses dynamically generated keys
rather than statically configured
keys to authenticate WPA clients.
rsn-ie disable Does not use the RSN IE in
transmitted frames. (The RSN IE
is required for 802.11i. RSN is
sometimes called WPA2.)
shared-key-auth disable Does not use shared-key
authentication.
This parameter does not enable
PSK authentication for WPA. To
enable PSK encryption for WPA,
use the set radio-profile auth-
psk command.
short-retry-count 5 Sends a short unicast frame up to
five times without
acknowledgment.
soda disable Sygate On Demand Agent
(SODA) files are not downloaded
to connecting clients.
ssid-name trapeze Uses the SSID name trapeze.
ssid-type crypto Encrypts wireless traffic for the
SSID.
static-cos disable Assigns CoS based on the QoS
mode (wmm or svp) or based on
ACLs.
Table 5: Defaults for Service Profile Parameters (continued)
Parameter Default Value
Radio Behavior When
Parameter Set To
Default Value