Hub/Switch Reference Guide

300 AP Commands
NN47250-100 (Version 02.51)
set radio-profile long-retry
Deprecated in WSS Software Version 4.1. In 4.1, this parameter is associated with service profiles instead of
radio profiles. See set service-profile long-retry-count on page 319.
set radio-profile max-rx-lifetime
Changes the maximum receive threshold for the AP radios in a radio profile. The maximum receive threshold
specifies the number of milliseconds that a frame received by a radio can remain in buffer memory.
Syntax set radio-profile name max-rx-lifetime time
Defaults The default maximum receive threshold for AP radios is 2000 ms (2 seconds).
Access Enabled.
Usage You must disable all radios that are using a radio profile before you can change parameters
in the profile. Use the set radio-profile mode command .
Examples The following command changes the maximum receive threshold for radio profile rp1
to 4000 ms:
WSS# set radio-profile rp1 max-rx-lifetime 4000
success: change accepted.
See Also
• set radio-profile mode on page 291
• set radio-profile max-tx-lifetime on page 290
• show radio-profile on page 376
set radio-profile max-tx-lifetime
Changes the maximum transmit threshold for the AP radios in a radio profile. The maximum transmit
threshold specifies the number of milliseconds that a frame scheduled to be transmitted by a radio can remain
in buffer memory.
Syntax set radio-profile name max-tx-lifetime time
name Radio profile name.
time Number of milliseconds. You can enter a value from 500 (0.5 second)
through 250,000 (250 seconds).
name Radio profile name.
time Number of milliseconds. You can enter a value from 500 (0.5 second)
through 250,000 (250 seconds).