Hub/Switch Reference Guide

268 AP Commands
NN47250-100 (Version 02.51)
Defaults Forced image download is disabled by default.
Access Enabled.
History Introduced in WSS Software 5.0.
Optional dap removed 6.0.
Usage A change to the forced image download option takes place the next time the AP is restarted.
Even when forced image download is disabled (the default), the AP still checks with the WSS to verify that the
AP has the latest image, and to verify that the WSS is running WSS Software Version 5.0 or later.
The AP loads its local image only if the WSS is running WSS Software Version 5.0 or later and does not have
a newer AP image than the one in the AP’s local storage. If the switch is not running WSS Software Version
5.0 or later, or the WSS has a newer version of the AP image than the version in the AP’s local storage, the AP
loads its image from the WSS.
Examples The following command enables forced image download on AP 69:
WSS# set ap 69 force-image-download enable
success: change accepted.
See Also show ap config on page 344
set ap group
Configures a named group of APs. WSS Software automatically load balances sessions among the access points in a
group. To balance the sessions, WSS Software rejects an association request for an access point’s radio if that radio has
at least four more active sessions than the radio of the same type with the least number of active sessions within the
group.
Syntax set {ap port-list | ap {ap-num | auto}} group name
Defaults APs are not grouped by default.
Access Enabled.
ap auto Configures forced image download for the AP configuration profile. (See
set ap auto on page 245.)
force-image-
download enable
Enables forced image download.
force-image-
download disable
Disables forced image download.
ap port-list List of AP access ports to add to the group.
ap ap-num Number of a AP to add to the group.
ap auto Configures an AP group for the AP configuration profile. (See set ap
auto on page 245.)
name AP group name of up to 16 alphanumeric characters, with no spaces.