Hub/Switch Reference Guide

AP Commands 255
Nortel WLAN—Security Switch 2300 Series Command Line Reference
reset ap
Restarts an AP.
Syntax reset {ap port-list | ap ap-num}
Defaults None.
Access Enabled.
Usage When you enter this command, the AP drops all sessions and reboots.
Examples The following command resets the AP on port 7:
WSS# reset ap 7
This will reset specified AP devices. Would you like to continue? (y/n)y
success: rebooting ap attached to port 7
set ap auto
Creates a profile for automatic configuration of APs.
Syntax set ap auto
Defaults None.
Access Enabled.
History
ap port-list List of ports connected to the AP to restart.
ap ap-num Number of a AP to reset.
Caution! Restarting an AP can cause data loss for users who are currently associated
with the AP.
Version 4.0 Command introduced.
Version 4.1 Option persistent added.
Version 5.0
• Option force-image-download added.
• Option radio num auto-tune min-client-rate
removed.
• Option radio num tx-pwr removed.
Version 6.0
• Option dap removed.