Hub/Switch Reference Guide

240 Network Domain Commands
NN47250-100 (Version 02.51)
Syntax show network-domain
Defaults None.
Access Enabled.
History Introduced in WSS Software 4.1.
Examples To display Network Domain status, type the following command. The output of the command
differs based on whether the WSS is a member of a Network Domain or a Network Domain seed.
On a WSS that is a Network Domain member, the following output is displayed:
WSS# show network-domain
Member Network Domain name: California
Member State Mode Mobility-Domain
--------------- ------------- ------ ---------------
10.8.107.1 UP SEED default
On a WSS that is a Network Domain seed, information is displayed about the Network Domains of which the WSS is a
member, as well as Network Domain seeds with which the WSS has a peer relationship. For example:
WSS# show network-domain
Network Domain name: California
Peer State
--------------- -------------
10.8.107.1 UP
Member State Mode Mobility-Domain
--------------- ------------- ------ ---------------
10.1.0.0 DOWN SEED
Member Network Domain name:
Member State Mode Mobility-Domain
--------------- ------------- ------ ---------------
10.8.107.1 UP MEMBER default
10.1.0.0 DOWN SEED
Table 33 describes the fields in the display.
Table 1: show network-domain Output
Field Description
Output if WSS is the Network Domain seed:
Network Domain name Name of the Network Domain for which the WSS is a seed.
Peer IP addresses of the other seeds in the Network Domain.
State State of the connection between the WSS and the peer Network
Domain seeds:
•UP
•DOWN
Member IP addresses of the seed WSS and members in the Network
Domain