Hub/Switch Reference Guide

AAA Commands 225
Nortel WLAN—Security Switch 2300 Series Command Line Reference
show location policy
Displays the list of location policy rules that make up the location policy on a WSS.
Syntax show location policy
Defaults None.
Access Enabled.
Examples The following command displays the list of location policy rules in the location policy on a WSS:
WSS show location policy
Id Clauses
----------------------------------------------------------------
1) deny if user eq *.theirfirm.com
2) permit vlan guest_1 if vlan neq *.wodefirm.com
3) permit vlan bld4.tac inacl tac_24.in if user eq *.ny.wodefirm.com
See Also
• clear location policy on page 171
• set location policy on page 193
show mobility-profile
Displays the named Mobility Profile. If you do not specify a Mobility Profile name, this command shows all Mobility
Profile names and port lists on the
WSS.
Syntax show mobility-profile [name]
Defaults None.
Access Enabled.
Examples The following command displays the Mobility Profile magnolia:
WSS# show mobility-profile magnolia
Mobility Profiles
Name Ports
=========================
magnolia AP 12
See Also
• clear mobility-profile on page 175
• set mobility-profile on page 204
name Name of an existing Mobility Profile.