Hub/Switch Reference Guide

AAA Commands 221
Nortel WLAN—Security Switch 2300 Series Command Line Reference
sg3: rs-5
Web Portal:
enabled
set authentication admin Jose sg3
set authentication console * none
set authentication mac ssid mycorp * local
set authentication dot1x ssid mycorp Geetha eap-tls
set authentication dot1x ssid mycorp * peap-mschapv2 sg1 sg2 sg3
set authentication dot1x ssid any ** peap-mschapv2 sg1 sg2 sg3
set accounting dot1x Nin ssid mycorp stop-only sg2
set accounting admin Natasha start-stop local
user Nin
Password = 082c6c64060b (encrypted)
Filter-Id = acl-999.in
Filter-Id = acl-999.out
mac-user 01:02:03:04:05:06
usergroup eastcoasters
session-timeout = 99
Table 30 describes the fields that can appear in show aaa output.
Table 2: show aaa Output
Field Description
Default Values RADIUS default values for all parameters.
authport UDP port on the WSS for transmission of RADIUS authorization and
authentication messages. The default port is 1812.
acctport UDP port on the WSS for transmission of RADIUS accounting records. The
default is port 1813.
timeout Number of seconds the WSS waits for a RADIUS server to respond before
retransmitting. The default is 5 seconds.
acct-timeout Number of seconds the WSS waits for a RADIUS server to respond to an
accounting request before retransmitting. The default is 5 seconds.
retrans Number of times the WSS retransmits a message before determining a
RADIUS server unresponsive. The default is 3 times.
deadtime Number of minutes the WSS waits after determining a RADIUS server is
unresponsive before trying to reconnect with this server. During the dead time,
the RADIUS server is ignored by the WSS. The default is 0 minutes.
key Shared secret key, or password, used to authenticate to a RADIUS server. The
default is no key (null).