Hub/Switch Reference Guide

220 AAA Commands
NN47250-100 (Version 02.51)
History
Usage
This command disables or reenables support for Web-based AAA. However, Web-based AAA has
additional configuration requirements. For information, see the “Configuring AAA for Network Users”
chapter in the Nortel WLAN Security Switch 2300 Series Configuration Guide.
Examples To disable Web-based AAA, type the following command:
WSS# set web-portal disable
success: change accepted.
See Also
• clear authentication web on page 171
• set service-profile auth-fallthru on page 308
• set user on page 206
show aaa
Displays all current AAA settings.
Syntax show aaa
Defaults None.
Access Enabled.
History
Examples To display all current AAA settings, type the following command:
WSS# show aaa
Default Values
authport=1812 acctport=1813 timeout=5 acct-timeout=5
retrans=3 deadtime=0 key=(null) author-pass=(null)
Radius Servers
Server Addr Ports T/o Tries Dead State
--------------------------------------------------------------------
rs-3 198.162.1.1 1821 1813 5 3 0 UP
rs-4 198.168.1.2 1821 1813 77 11 2 UP
rs-5 198.162.1.3 1821 1813 42 23 0 UP
Server groups
sg1: rs-3
sg2: rs-4
Version 4.0 Command name changed from set web-aaa to set web-portal,
to match change to portal-based implementation.
Version 4.0 Web Portal section added, to indicate the state of the Web-based
AAA feature