Hub/Switch Reference Guide

AAA Commands 219
Nortel WLAN—Security Switch 2300 Series Command Line Reference
Syntax set usergroup group-name attr attribute-name value
Defaults None.
Access Enabled.
Usage To change the value of an attribute, enter set usergroup attr with the new value. To delete an
attribute, use clear usergroup attr.
To add a user to a group, user the command set user group.
You can assign attributes to individual users and to user groups. If attributes are configured for a user and also for the
group the user is in, the attributes assigned to the individual user take precedence for that user. For example, if the start-
date attribute configured for a user is sooner than the start-date configured for the user group the user is in, the user’s
network access can begin as soon as the user start-date. The user does not need to wait for the user group’s start date.
Examples The following command adds the user group cardiology to the local database and assigns all the
group members to VLAN crimson:
WSS# set usergroup cardiology attr vlan-name crimson
success: change accepted.
See Also
• clear usergroup on page 177
• clear usergroup attr on page 178
• show aaa on page 210
set web-portal
Globally enables or disables Web-based AAA on a WSS.
Syntax set web-portal {enable | disable}
Defaults Enabled.
Access Enabled.
group-name Name of a group for password users. Specify a name of up to
32 alphanumeric characters, with no spaces. The name must begin
with an alphabetic character.
attribute-name value Name and value of an attribute you are using to authorize all users
in the group for a particular service or session characteristic. For a
list of authorization attributes and values that you can assign to
users, see Table 29 on page 198.
enable Enables Web-based AAA on the switch.
disable Disables Web-based AAA on the switch.