Hub/Switch Reference Guide

AAA Commands 211
Nortel WLAN—Security Switch 2300 Series Command Line Reference
time-of-day
(network access mode
only)
Day(s) and time(s) during
which the user is permitted
to log into the network.
After authorization, the
user’s session can last until
either the Time-Of-Day
range or the Session-
Timeout duration (if set)
expires, whichever is
shorter.
Note: Time-Of-Day is a
Nortel vendor-specific
attribute (VSA). The
vendor ID is 562, and the
vendor type is 234.
One of the following:
• never—Access is always denied.
• any—Access is always allowed.
• al—Access is always allowed.
• One or more ranges of values that
consist of one of the following day
designations (required), and a time
range in hhmm-hhmm 4-digit 24-hour
format (optional):
• mo—Monday
• tu—Tuesday
• we—Wednesday
• th—Thursday
• fr—Friday
• sa—Saturday
• su—Sunday
• wk—Any day between Monday
and Friday
Separate values or a series of ranges (except time
ranges) with commas (,) or a vertical bar (|). Do
not use spaces.
The maximum number of characters is 253.
For example, to allow access only on Tuesdays
and Thursdays between 10 a.m. and 4 p.m.,
specify the following: time-of-day tu1000-
1600,th1000-1600
time-of-day
(network access mode
only)
(cont.)
To allow access only on weekdays between 9 a.m
and 5 p.m., and on Saturdays from 10 p.m. until
2 a.m., specify the following: time-of-
day wk0900-1700,sa2200-0200
(Also see the examples for set user attr on
page 207.)
Note: You can use time-of-day in conjunction
with start-date, end-date, or both.
Table 1: Authentication Attributes for Local Users (continued)
Attribute Description Valid Value(s)