Hub/Switch Reference Guide

AAA Commands 201
Nortel WLAN—Security Switch 2300 Series Command Line Reference
Defaults None.
Access Enabled.
History Introduced in WSS Software 4.0.
Usage AAA for third-party AP users has additional configuration requirements. See the
“Configuring AAA for Users of Third-Party APs” section in the “Configuring AAA for Network
Users” chapter of the Nortel WLAN Security Switch 2300 Series Configuration Guide.
Examples The following command configures a proxy authentication rule that matches on all
usernames associated with SSID mycorp. WSS Software uses RADIUS server group srvrgrp1 to
proxy RADIUS requests and hence to authenticate and authorize the users.
WSS# set authentication proxy ssid mycorp ** srvrgrp1
See Also
• clear authentication proxy on page 170
• set radius proxy client on page 489
• set radius proxy port on page 489
set authentication web
Configures an authentication rule to allow a user to log in to the network using a web page served by the WSS.
The rule can be activated if the user is not otherwise granted or denied access by 802.1X, or granted access by
MAC authentication.
Syntax set authentication web {ssid ssid-name | wired} user-wildcard
method1 [method2] [method3] [method4]
user-wildcard A single user or a set of users.
Specify a username, use the double-asterisk wildcard character (**) to specify
all usernames, or use the single-asterisk wildcard character (*) to specify a set of
usernames up to or following the first delimiter character—either an at sign (@)
or a period (.). (For details, see “User Wildcards” on page 12.)
ssid ssid-name SSID name to which this authentication rule applies. To apply the rule to all
SSIDs, type any.