Hub/Switch Reference Guide

AAA Commands 183
Nortel WLAN—Security Switch 2300 Series Command Line Reference
Syntax clear mac-user mac-addr attr attribute-name
Defaults None.
Access Enabled.
Examples The following command removes an access control list (ACL) from the profile of a user at MAC
address 01:02:03:04:05:06:
WSS# clear mac-user 01:02:03:04:05:06 attr filter-id
success: change accepted.
See Also
• set mac-user attr on page 197
• show aaa on page 210
clear mac-user group
Removes a user profile from a MAC user group in the local database on the WSS, for a user who is authenticated by a
MAC address.
(To remove a MAC user group profile in RADIUS, see the documentation for your RADIUS server.)
Syntax clear mac-user mac-addr group
Defaults None.
Access Enabled.
Usage Removing a MAC user from a MAC user group removes the group name from the user’s profile, but
does not delete the user group from the local WSS database. To remove the group, use clear mac-usergroup.
Examples The following command deletes the user profile for a user at MAC address 01:02:03:04:05:06
from its user group:
WSS# clear mac-user 01:02:03:04:05:06 group
success: change accepted.
See Also
• clear mac-usergroup on page 174
• set mac-user on page 195
• show aaa on page 210
mac-addr MAC address of the user, in hexadecimal numbers separated by colons
(:). You can omit leading zeros.
attribute-name Name of an attribute used to authorize the MAC user for a particular
service or session characteristic. (For a list of authorization attributes,
see Table 29 on page 198.)
mac-addr MAC address of the user, in hexadecimal numbers separated by
colons (:). You can omit leading zeros.