Hub/Switch Reference Guide

AAA Commands 181
Nortel WLAN—Security Switch 2300 Series Command Line Reference
See Also
• set authentication proxy on page 190
• show aaa on page 210
clear authentication web
Removes a Web-based AAA rule.
Syntax clear authentication web {ssid ssid-name | wired} user-wildcard
Defaults None.
Access Enabled.
Examples The following command removes Web-based AAA for SSID research and
userwildcard temp*@thiscorp.com:
WSS# clear authentication web ssid research temp*@thiscorp.com
See Also
• clear authentication admin on page 167
• clear authentication console on page 168
• clear authentication dot1x on page 169
• clear authentication mac on page 170
• set authentication web on page 191
• show aaa on page 210
clear location policy
Removes a rule from the location policy on a WSS.
Syntax clear location policy rule-number
Defaults None.
Access Enabled.
ssid ssid-name SSID name to which this authentication rule applies.
wired Clears a rule used for access over a WSS’s wired-authentication port.
user-wildcard User-wildcard associated with the rule you are removing.
rule-number Index number of a location policy rule to remove from the location
policy.