Hub/Switch Reference Guide

180 AAA Commands
NN47250-100 (Version 02.51)
clear authentication mac
Removes a MAC authentication rule.
Syntax clear authentication mac {ssid ssid-name | wired} mac-addr-wildcard
Defaults None.
Access Enabled.
Examples The following command removes a MAC authentication rule for access to SSID thatcorp by
MAC addresses beginning with aa:bb:cc:
WSS# clear authentication mac ssid thatcorp aa:bb:cc:*
See Also
• clear authentication admin on page 167
• clear authentication console on page 168
• clear authentication dot1x on page 169
• clear authentication web on page 171
• set authentication mac on page 189
• show aaa on page 210
clear authentication proxy
Removes a proxy rule for third-party AP users.
Syntax clear authentication proxy ssid ssid-name user-wildcard
Defaults None.
Access Enabled.
History Introduced in WSS Software 4.0.
Examples The following command removes the proxy rule for SSID mycorp and userwildcard **:
WSS# clear authentication proxy ssid mycorp **
ssid ssid-name SSID name to which this authentication rule applies.
wired Clears a rule used for access over a WSS’s wired-authentication port.
mac-addr-wildcard MAC address wildcard associated with the rule you are removing.
ssid ssid-name SSID name to which this authentication rule applies.
user-wildcard User-wildcard associated with the rule you are removing.