Hub/Switch Reference Guide

AAA Commands 179
Nortel WLAN—Security Switch 2300 Series Command Line Reference
success: change accepted.
See Also
• clear authentication admin on page 167
• clear authentication dot1x on page 169
• clear authentication mac on page 170
• clear authentication web on page 171
• set authentication console on page 183
• show aaa on page 210
clear authentication dot1x
Removes an 802.1X authentication rule.
Syntax clear authentication dot1x {ssid ssid-name | wired} user-wildcard
Defaults None.
Access Enabled.
Examples The following command removes 802.1X authentication for network users with usernames
ending in @thiscorp.com who try to access SSID finance:
WSS# clear authentication dot1x ssid finance *@thiscorp.com
See Also
• clear authentication admin on page 167
• clear authentication console on page 168
• clear authentication mac on page 170
• clear authentication web on page 171
• set authentication dot1x on page 185
• show aaa on page 210
clear authentication last-resort
Deprecated in WSS Software Version 5.0. The last-resort user is not required or supported in WSS Software Version
5.0. Instead, a user who accesses the network on an SSID by using the fallthru access type last-resort is automatically a
last-resort user. The authorization attributes assigned to the user come from the default authorization attributes set on the
SSID.
ssid ssid-name SSID name to which this authentication rule applies.
wired Clears a rule used for access over a WSS’s wired-authentication port.
user-wildcard User-wildcard associated with the rule you are removing.