Hub/Switch Reference Guide

IP Services Commands 171
Nortel WLAN—Security Switch 2300 Series Command Line Reference
show timedate
Shows the date and time of day currently set on a WSS’s real-time clock.
Syntax show timedate
Defaults None.
Access All.
Examples To display the time and date set on a WSS’s real-time clock, type the following command:
23x0# show timedate
Sun Feb 29 2004, 23:59:02 PST
See Also
• clear summertime on page 105
• clear timezone on page 106
• set summertime on page 140
• set timedate on page 142
• set timezone on page 143
• show summertime on page 160
• show timezone on page 161
show timezone
Shows the time offset for the real-time clock from UTC on a WSS.
Syntax show timezone
Defaults None.
Access All.
Examples To display the offset from UTC, type the following command:
WSS# show timezone
Timezone set to 'pst', offset from UTC is -8 hours
See Also
• clear summertime on page 105
• clear timezone on page 106
• set summertime on page 140
• set timedate on page 142
• set timezone on page 143
• show summertime on page 160
• show timedate on page 161