Hub/Switch Reference Guide

166 IP Services Commands
NN47250-100 (Version 02.51)
See Also
• clear ip telnet on page 102
• set ip https server on page 116
• set ip telnet on page 120
• set ip telnet server on page 120
• show ip https on page 152
show ntp
Displays NTP client information.
Syntax show ntp
Defaults None.
Access All.
Examples To display NTP information for a WSS, type the following command:
WSS> show ntp
NTP client: enabled
Current update-interval: 20(secs)
Current time: Fri Feb 06 2004, 12:02:57
Timezone is set to 'PST', offset from UTC is -8:0 hours.
Summertime is enabled.
Last NTP update: Fri Feb 06 2004, 12:02:46
NTP Server Peer state Local State
---------------------------------------------------
192.168.1.5 SYSPEER SYNCED
Table 27 describes the fields in this display.
Table 10: Output for show ip telnet
Field Description
Server Status State of the HTTPS server:
• Enabled
• Disabled
Port TCP port number on which the WSS listens for Telnet
management traffic.