Hub/Switch Reference Guide

160 IP Services Commands
NN47250-100 (Version 02.51)
See Also
• clear interface on page 99
• set interface on page 109
• set interface status on page 112
show ip alias
Displays the IP aliases configured on the WSS.
Syntax show ip alias [name]
Defaults If you do not specify an alias name, all aliases are displayed.
Access Enabled.
Examples The following command displays all the aliases configured on a WSS:
WSS# show ip alias
Name IP Address
-------------------- --------------------
HR1 192.168.1.2
payroll 192.168.1.3
radius1 192.168.7.2
Table 5: Output for show interface
Field Description
VLAN VLAN number
Name VLAN name
Address IP address
Mask Subnet mask
Enabled Administrative state:
• YES (enabled)
• NO (disabled)
State Link state:
• Up (operational)
• Down (unavailable)
RIB Routing Information Base
name Alias string.