Manualshelf

Hub/Switch Reference Guide

ManualsBrandsNortel Networks ManualsSwitch2300 Series
151152153154155156157158159160
IP Services Commands 159
Nortel WLAN—Security Switch 2300 Series Command Line Reference
See Also
set interface dhcp-server on page 111
show interface
Displays the IP interfaces configured on the WSS.
Syntax
show interface [vlan-id]
Defaults
If you do not specify a VLAN ID, interfaces for all VLANs are displayed.
Access
All.
History
Usage
The IP interface table flags an address assigned by a DHCP server with an asterisk ( * ).
Examples
The following command displays all the IP interfaces configured on a WSS:
WSS# show interface
VLAN Name Address Mask Enabled State RIB
---- --------------- --------------- --------------- ------- ----- ------------ -----
1 default 10.10.10.10 255.255.255.0 YES Up ipv4
2 mauve 10.10.20.10 255.255.255.0 NO Down ipv4
4 corpvlan *10.3.1.110 255.255.255.0 YES Up ipv4
Table 21 describes the fields in this display.
Subnet Mask Network mask of the IP address leased to the client.
Default Router Default router IP address included in the DHCP Offer to the client.
DNS Servers DNS server IP address(es) included in the DHCP Offer to the client.
DNS Domain Name Default DNS domain name included in the DHCP Offer to the client.
vlan-id VLAN name or number.
Version 4.0 RIB field added.
Table 4.Output for show dhcp-server verbose (continued)
Field Description