Hub/Switch Reference Guide

IP Services Commands 155
Nortel WLAN—Security Switch 2300 Series Command Line Reference
See Also
• set arp on page 108
• set arp agingtime on page 109
show dhcp-client
Displays DHCP client information for all VLANs.
Syntax show dhcp-client
Defaults None.
Access All.
History Introduced in WSS Software Version 4.0.
Type Entry type:
• DYNAMIC—Entry was learned from network
traffic and ages out if unused for longer than the
ARP aging timeout.
• LOCAL—Entry for the WSS MAC address. Each
VLAN has one local entry for the switch MAC
address.
• PERMANENT—Entry does not age out and
remains in the configuration even following a
reboot.
• STATIC—Entry does not age out but is removed
after a reboot.
State Entry state:
• RESOLVING—WSS Software sent an ARP
request for the entry and is waiting for the reply.
• RESOLVED—Entry is resolved.
Table 1: Output for show arp (continued)
Field Description