Hub/Switch Reference Guide

154 IP Services Commands
NN47250-100 (Version 02.51)
show arp
Displays the ARP table.
Syntax show arp [ip-addr]
Defaults If you do not specify an IP address, the whole ARP table is displayed.
Access All.
Examples The following command displays ARP entries:
WSS# show arp
ARP aging time: 1200 seconds
Host HW Address VLAN Type State
------------------------------ ----------------- ----- ------- ---------------
10.5.4.51 00:0b:0e:02:76:f5 1 DYNAMIC RESOLVED
10.5.4.53 00:0b:0e:02:76:f7 1 LOCAL RESOLVED
Table 17 describes the fields in this display.
ip-addr IP address.
Table 1: Output for show arp
Field Description
ARP aging time Number of seconds a dynamic entry can remain unused before
WSS Software removes the entry from the ARP table.
Host IP address, hostname, or alias.
HW Address MAC address mapped to the IP address, hostname, or alias.
VLAN VLAN the entry is for.