Hub/Switch Reference Guide

138 IP Services Commands
NN47250-100 (Version 02.51)
Defaults A default notification profile (named default) is already configured in WSS Software.
All notifications in the default profile are dropped by default.
Access Enabled.
History Introduced in WSS Software Version 4.0.
Examples The following command changes the action in the default notification profile from
drop to send for all notification types:
WSS# set snmp notify profile default send all
success: change accepted.
notification-type
(cont.)
• RFDetectDoSPortTraps—Generated when WSS
Software detects an associate request flood,
reassociate request flood, or disassociate request
flood.
• RFDetectDoSTraps—Generated when WSS
Software detects a DoS attack other than an associate
request flood, reassociate request flood, or
disassociate request flood.
• RFDetectInterferingRogueAPTraps—Generated
when an interfering device is detected.
• RFDetectInterferingRogueDisappearTraps—
Generated when an interfering device is no longer
detected.
• RFDetectSpoofedMacAPTraps—Generated when
WSS Software detects a wireless packet with the
source MAC address of a Nortel AP, but without the
spoofed AP’s signature (fingerprint).
• RFDetectSpoofedSsidAPTraps—Generated when
WSS Software detects beacon frames for a valid
SSID, but sent by a rogue AP.
• RFDetectUnAuthorizedAPTraps—Generated when
WSS Software detects the MAC address of an AP that
is on the attack list.
• RFDetectUnAuthorizedOuiTraps—Generated when
a wireless device that is not on the list of permitted
vendors is detected.
• RFDetectUnAuthorizedSsidTraps—Generated
when an SSID that is not on the permitted SSID list is
detected.
all Sends or drops all notifications.