Hub/Switch Reference Guide

IP Services Commands 137
Nortel WLAN—Security Switch 2300 Series Command Line Reference
notification-type
(cont.)
• CounterMeasureStopTraps—Generated when WSS
Software stops countermeasures against a rogue
access point.
• DAPConnectWarningTraps—Generated when a
Distributed AP whose fingerprint has not been
configured in WSS Software establishes a
management session with the switch.
• DeviceFailTraps—Generated when an event with an
Alert severity occurs.
• DeviceOkayTraps—Generated when a device returns
to its normal state.
• LinkDownTraps—Generated when the link is lost on
a port.
• LinkUpTraps—Generated when the link is detected
on a port.
• MichaelMICFailureTraps—Generated when two
Michael message integrity code (MIC) failures occur
within 60 seconds, triggering Wi-Fi Protected Access
(WPA) countermeasures.
• MobilityDomainJoinTraps—Generated when the
WSS is initially able to contact a mobility domain
seed member, or can contact the seed member after a
timeout.
• MobilityDomainTimeoutTraps—Generated when a
timeout occurs after a WSS has unsuccessfully tried to
communicate with a seed member.
• PoEFailTraps—Generated when a serious PoE
problem, such as a short circuit, occurs.
• RFDetectAdhocUserTraps—Generated when WSS
Software detects an ad-hoc user.
• RFDetectRogueAPTraps—Generated when WSS
Software detects a rogue access point.
• RFDetectRogueDisappearTraps—Generated when
a rogue access point is no longer being detected.
• RFDetectClientViaRogueWiredAPTraps—
Generated when WSS Software detects, on the wired
part of the network, the MAC address of a wireless
client associated with a third-party AP.