Hub/Switch Reference Guide

IP Services Commands 133
Nortel WLAN—Security Switch 2300 Series Command Line Reference
See Also
• clear ntp server on page 102
• clear ntp update-interval on page 103
• set ntp on page 121
• set ntp server on page 122
• show ntp on page 156
set snmp community
Configures a community string for SNMPv1 or SNMPv2c.
Syntax set snmp community name comm-string
access {read-only | read-notify | notify-only | read-write | notify-read-write}
Defaults None.
Access Enabled.
Note. For SNMPv3, use the set snmp usm command to configure an SNMPv3 user.
SNMPv3 does not use community strings.
comm-string Name of the SNMP community. Specify between 1 and 32
alphanumeric characters, with no spaces.
read-only Allows an SNMP management application using the string to get
(read) object values on the switch but not to set (write) them.
read-notify Allows an SNMP management application using the string to get
object values on the switch but not to set them. The switch can use
the string to send notifications.
notify-only Allows the switch to use the string to send notifications.
read-write Allows an SNMP management application using the string to get
and set object values on the switch.
notify-read-write Allows an SNMP management application using the string to get
and set object values on the switch. The switch also can use the
string to send notifications.