Hub/Switch Reference Guide
116 IP Services Commands
NN47250-100 (Version 02.51)
• show timedate on page 161
• show timezone on page 161
clear system ip-address
Clears the system IP address.
Syntax
clear system ip-address
Defaults
None.
Access
Enabled.
Usage
Clearing the system IP address can interfere with system tasks that use the system IP
address, including the following:
• Mobility Domain operations
• Topology reporting for dual-homed APs
• Default source IP address used in unsolicited communications such as AAA accounting reports and
SNMP traps
Examples
To clear the system IP address, type the following command:
WSS# clear system ip-address
success: change accepted.
See Also
• set system ip-address on page 141
• show system on page 68
clear timezone
Clears the time offset for the WSS’s real-time clock from Coordinated Universal Time (UTC). UTC is also
know as Greenwich Mean Time (GMT).
Syntax
clear timezone
Defaults
None.
Access
Enabled.
Examples
To return the WSS’s real-time clock to UTC, type the following command:
WSS# clear timezone
success: change accepted.
Caution! Clearing the system IP address disrupts the system tasks that use the
address.