Hub/Switch Reference Guide

IP Services Commands 115
Nortel WLAN—Security Switch 2300 Series Command Line Reference
See Also
• set snmp notify target on page 131
• show snmp notify target on page 159
clear snmp usm
Clears an SNMPv3 user.
Syntax clear snmp usm usm-username
Defaults None.
Access Enabled.
History Introduced in WSS Software Version 4.0.
Examples The following command clears SNMPv3 user snmpmgr1:
WSS# clear snmp usm snmpmgr1
success: change accepted.
See Also
• set snmp usm on page 136
• show snmp usm on page 160
clear summertime
Clears the summertime setting from a WSS.
Syntax clear summertime
Defaults None.
Access Enabled.
Examples To clear the summertime setting from a WSS, type the following command:
WSS# clear summertime
success: change accepted.
See Also
• clear timezone on page 106
• set summertime on page 140
• set timedate on page 142
• set timezone on page 143
• show summertime on page 160
usm-username Name of the SNMPv3 user you want to clear.