Manualshelf

Hub/Switch Reference Guide

ManualsBrandsNortel Networks ManualsSwitch2300 Series
101102103104105106107108109110
IP Services Commands 109
Nortel WLAN—Security Switch 2300 Series Command Line Reference
clear interface
Removes an IP interface.
Syntax
clear interface vlan-id ip
Defaults
None.
Access
Enabled.
Usage
If the interface you want to remove is configured as the system IP address, removing the address can
interfere with system tasks that use the system IP address, including the following:
• Mobility domain operations
• Topology reporting for dual-homed APs
• Default source IP address used in unsolicited communications such as AAA accounting reports and SNMP traps
Examples
The following command removes the IP interface configured on VLAN mauve:
WSS# clear interface mauve ip
success: cleared ip on vlan mauve
See Also
• set interface on page 109
• set interface status on page 112
• show interface on page 149
clear snmp community on page 103
clear snmp usm on page 105
clear snmp notify profile on page 104
clear snmp notify target on page 104
Ping ping on page 107
Telnet client telnet on page 162
Traceroute traceroute on page 163
DHCP server set interface dhcp-server on page 111
show dhcp-server on page 147
vlan-id VLAN name or number.