Hub/Switch Reference Guide

106 Quality of Service Commands
NN47250-100 (Version 02.51)
Ingress QoS Classification Map (dscp-to-cos)
Ingress DSCP CoS Level
===============================================================================
00-09 0 0 0 0 0 0 0 0 1 1
10-19 1 1 1 1 1 1 2 2 2 2
20-29 2 2 2 2 3 3 3 3 3 3
30-39 3 3 4 4 4 4 4 4 4 4
40-49 5 5 5 5 5 5 5 5 6 6
50-59 6 6 6 6 6 6 7 7 7 7
60-63 7 7 7 7
Egress QoS Marking Map (cos-to-dscp)
CoS Level 0 1 2 3 4 5 6 7
===============================================================================
Egress DSCP 0 8 16 24 32 40 48 56
Egress ToS byte 0x00 0x20 0x40 0x60 0x80 0xA0 0xC0 0xE0
See Also show qos dscp-table on page 96
show qos dscp-table
Displays a table that maps Differentiated Services Code Point (DSCP) values to their equivalent combinations of IP
precedence values and IP ToS values.
Syntax show qos dscp-table
Defaults None.
Access Enabled.
History Introduced in WSS Software Version 4.0 as the show security acl dscp command and renamed in
WSS Software Version 4.1.
Examples The following command displays the table:
WSS# show qos dscp-table
DSCP TOS precedence tos
dec hex dec hex
------------------------------------------------------
0 0x00 0 0x00 0 0
1 0x01 4 0x04 0 2
2 0x02 8 0x08 0 4
...
63 0x3f 252 0xfc 7 14
See Also show qos on page 95