Hub/Switch Reference Guide

100 VLAN Commands
NN47250-100 (Version 02.51)
WSS# show vlan config burgundy
Admin VLAN Tunl Port
VLAN Name Status State Affin Port Tag State
---- ---------------- ------ ----- ----- ---------------- ----- ------------------
2 burgundy Up Up 5
2 none Up
3 none Up
4 none Up
6 none Up
11 none Up
t:10.10.40.4 none Up
Table 16 describes the fields in this display.
Table 6: Output for show vlan config
Field Description
VLAN VLAN number.
Name VLAN name.
Admin Status Administrative status of the VLAN:
• Down—The VLAN is disabled.
• Up—The VLAN is enabled.
VLAN State Link status of the VLAN:
• Down—The VLAN is not connected.
• Up—The VLAN is connected.
Tunl Affin Tunnel affinity value assigned to the VLAN.
Port Member port of the VLAN. The port can be a physical port or a
virtual port.
• Physical ports are 10/100 Ethernet or gigabit
Ethernet ports on the switch, and are listed by port
number.
• Virtual ports are tunnels to other switches in a
mobility domain, and are listed as follows: t:ip-
addr, where ip-addr is the system IP address of
the WSS at the other end of the tunnel.
Note: This field can include AP access ports and wired
authentication ports, because WSS Software dynamically adds
these ports to a VLAN when handling user traffic for the VLAN.
Tag Tag value assigned to the port.
Port State Link state of the port:
• Down—The port is not connected.
• Up—The port is connected.